TOWNFALLSILENT HILL GUIDE
Search the guide

Search topics, controls, and questions across the guide.

View on Steam
Skip to content
Guides

Silent Hill: Townfall FIX THIS Puzzle: A5D7, E3E3 and Valves

Solve FIX THIS in Townfall Part 6: take the Controller Key from Floor 2, enter A5D7 at ALARM STATUS, E3E3 at the COMMAND CONSOLE, then set the four valves and ignite.

Quick answer

Take the Reference Sheet from the table and the Controller Key from the box left of the Floor 2 valve. Insert the key at the ALARM STATUS console and enter A5D7, then enter E3E3 at the COMMAND CONSOLE and select Gas Flow. Turn the valves: Floor 1 right twice, Floor 2 left once, Floor 3 left twice, Floor 4 right twice. Run Flow Test, press IGNITE and crawl out past the rubble.

On this page
Part
6
Alarm code
A5D7
Clamp code
E3E3

Collect the two items

The room with FIX THIS written on the wall is a gas-flow system across four floors. Pick up the Reference Sheet from the table left of the console panel; it holds the codes. Then ride the elevator to Floor 2 and open the box to the left of the valve for the Controller Key.

Enter the two codes

Back on the ground floor, use the left console marked ALARM STATUS: insert the Controller Key, enter A5D7 and press OK. Then go to the COMMAND CONSOLE on the right, enter E3E3 and press OK to release the rotation clamps, and select Gas Flow.

Turn the four valves

Visit each floor by elevator and turn its valve the stated number of times. GameRant and allthings.how give the same turns.

FIX THIS valve turns
FloorDirectionTurns
1Right2
2Left1
3Left2
4Right2

If a console rejects the code

The ALARM STATUS console only accepts a code after the Controller Key is inserted, so fetch the key from Floor 2 before trying A5D7. Both codes mix letters and digits: A5D7 is A, five, D, seven, and E3E3 is E, three, E, three. They come from the Reference Sheet on the table, which is worth reading if your version shows different values. Enter the alarm code before the clamp code; the order in both walkthroughs is alarm first, clamps second.

Test, ignite and get out

Return to the COMMAND CONSOLE and choose Flow Test. All six indicators, the outlet, the inlet and sections 1 to 4, should turn green. If one stays red, recheck that floor’s valve. Press IGNITE, then head to the dark left side of the room, crouch and squeeze past the yellow-marked rubble to leave.

Common questions

Where is the Controller Key?

In a box to the left of the valve on Floor 2, reached by the elevator.

Flow Test shows a red section. What now?

That floor’s valve is off. Reset it to the table value: right 2, left 1, left 2, right 2 for Floors 1 to 4.

REFERENCE RECORD

Sources used for this page